ASME SEC VIII ug-99(h)를 참조해서 다음과 같은 결론을 얻을 수 있었다.
'특수한 종류의 액체를 제외하고, 일반적인 증류수 등의 액체를 사용 시에
MDMT + 섭씨17도 이상에서 온도를 결정하면 된다.
단, 화씨 120도 (섭씨 48도)를 초과하지는 않아야 한다.'
여기서 취성 파괴 및 물의 어는점을 고려하면, MDMT+17도가 영하의 값을 가지더라도,
최소한 섭씨 0도 이상에서 절차서를 만드는 것이 낫다고 생각한다.
배관의 경우에는 ASME B 31.1에서 별도의 온도 규정을 찾지 못했다.
137.1.2(2016ed)
'Temperature of Test Medium.
The temperature of the test medium shall be that of the available source unless otherwise specified by the owner.
The test pressure shall not be applied until the system and the pressurizing medium are approximately at the same temperature. When conducting pressure tests at low metal temperatures, the possibility of brittle fracture shall be considered.'
우리는 압력용기와 특별히 다른 조건에 사용되는 배관이 없었기에, ug-99(h)를 토대로 절차서 상 배관의 수압 테스트 온도를 결정하였다.